Past Performance

Past Performance

Detailed information on a selection of ECLIPS’s (formerly Sea Box International) past projects:

• Australian Defence Force Army HQ — JMILS Demonstration
• Australian Defence Force — COVID-19 Response Shelters
• Australian Defence Force — ATM CROP and JMIC
• Shell Darwin — Supply of 40 ft Container Roll-Out Warehousing System (CROWS™)
• Australian Defence Force Army HQ — Supply of JMIC Drawers and Shelves
• Australian Defence Force Army HQ — Supply of Container Roll Out Platforms (CROP) and Joint Modular Intermodal Containers (JMIC)
• Australian Defence Force RPDE — Task 59 155 mm Ammunition Unit Load Carrier (ULC)
• Australian Defence Force LAND 121 Contract — ISO 1C Flatracks (2157 units) and Cargo Gate Kits
• Chevron Australia — Container Roll-Out Warehousing System (CROWS) x 4000 units
• Chevron KJV Projects
• TFTA UOTF Projects
• Atlas Wodgina Kitchen Expansion Project
• Australian Navy Generator Modules
• Manitowoc 80 tonne Crane CES Carriage and Stowage Solution
• Cyclone Shelters
• MHOV Project — Flatracks
• Australian Army — Supply of Waste Water Treatment Plant (WWTP) to AACAP 2019
• DTSO Transportable Field Trials Laboratory (TFTL)
• Agilent Technologies — Equipment Calibration Laboratory
• ADF Maritime Surveillance Tonga — Accommodation Module
• 25 tonne Crane Spreader Bar
• Defence Innovation Hub — Army Innovation Day 2021 Condition Based Maintenance Software System (CBMSS)
• Defence Innovation Hub — Digitalisation of the Joint Modular Intermodal Logistics System (D-JMILS) Ph2
• Hanwha LAND 400-3 — Integrated Logistics Support Services Risk Mitigation Activity (RMA)
• Hanwha LAND 400-3 — Offboard Health and Usage Monitoring System (HUMS)
• Hanwha LAND 400-3 — Vehicle Information Management System (VIMS)
• Camcode — Army Headquarters Codification and Unique Identification Program

Australian Defence Force Army HQ — JMILS Demonstration

Contract Title and Number (including Reference Site)	Contract Title: JMILS Demonstration Contract No.: 4501068983 Ref Site: N/A
Project Name and Number or Procurement Agency	Project Name: JMILS Demonstration Contract with: Army Headquarters (AHQ) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Manufacture and supply of Joint Modular Intermodal Logistics System (JMILS) equipment, including: single and double Joint Modular Intermodal Containers (JMIC), single and double JMIC lift adaptors, Container Roll Out Platforms (CROP), Stackable Plastics Cases (SPC) 122 and 124, CROP cover kits, 4 JMIC Interface Platforms (JIP), 6 JIP, 20 ft standard containers, 20 ft side-opening containers, JMIC shelves, Camcode labels, 20 ft MK1 Container Roll-Out Warehousing System (CROWS™) including legs and accessories, and scale models of equipment supplied.
Contract Dates	Start: 1 March 2019 Finish: 29 February 2020
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Fabrication and supply of JMILS equipment

Back to top



Australian Defence Force — COVID-19 Response Shelters

Contract Title and Number (including Reference Site)	Contract Title: COVID-19 Response Shelters Contract No.: 4501097459 Ref Site: N/A
Project Name and Number or Procurement Agency	Project Name: CASG COVID-19 Response Shelters Contract with: Australian Defence Force (ADF) End User: Department of Health
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and prototype an Australian-made capability, for which multiple isolation shelter kits and body storage kits can be produced and deployed for the COVID-19 response, by using both the kits and locally sourced shipping containers and refrigeration containers in order to provide expedient shelters. The Australian Government will have access to smart emergency shelter stock, allowing it to respond to future emergencies locally or overseas, leveraging excess shipping containers and the baseline kits.
Contract Dates	Start: 13 April 2020 Finish: 19 June 2020
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Design and supply prototype of shelter kits.

Back to top



Australian Defence Force — ATM CROP and JMIC

Contract Title and Number (including Reference Site)	Contract Title: ATM CROP and JMIC Contract No.: CCS01/CCS02 Ref Site: N/A
Project Name and Number or Procurement Agency	Project Name: ATM CROP and JMIC Contract with: Australian Defence Force (ADF) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Manufacture and supply of Container Roll Out Platforms (CROP), CROP cover kits, Joint Modular Intermodal Containers (JMIC), short and tall drawer assemblies to be mounted inside JMICs.
Contract Dates	Start: 30 October 2017 Finish: 7 July 2019
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Fabrication and supply of CROPs, JMICs and associated equipment.

Back to top



Shell Darwin — Supply of 40 ft Container Roll-Out Warehousing System (CROWS™)

Contract Title and Number (including Reference Site)	Contract Title: Shell Darwin (East Arm) 40' CROWS Contract No.: WO-0662-SF WO-0665-SF Ref Site: N/A
Project Name and Number or Procurement Agency	Project Name: Shell Darwin (East Arm) 40' CROWS
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Supply of 40 ft CROWS, CROWS Legs, and 40 ft containers.
Contract Dates	Start: December 2017 Finish: April 2018
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Perth, Western Australia Nature of work: Design and construction of logistics platforms and support legs.

Back to top



Australian Defence Force Army HQ — Supply of JMIC Drawers and Shelves

Contract Title and Number (including Reference Site)	Contract Title: ATM CROP and JMIC Contract No.: CCS01 - Contract Amendment Ref Site: Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: Container Roll Out Platforms (CROPs) - Contract Variation Contract with: Australian Defence Force (ADF) Army HQ End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Supply of: CROP JMICs JMIC Shelving systems JMIC Drawer systems CROWS™ 20 ft MK1 Container Scales Stackable Plastic Cases Stacking Legs.
Contract Dates	Start: May 2018 Finish: October 2018
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Design, build and supply JMIC storage systems.

Back to top



Australian Defence Force Army HQ — Supply of Container Roll Out Platforms (CROP) and Joint Modular Intermodal Containers (JMIC)

Contract Title and Number (including Reference Site)	Contract Title: ATM CROP and JMIC Contract No.: CCS01 Ref Site: Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: ATM CROP and JMIC Contract with: Australian Defence Force (ADF) Army HQ End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Army to purchase Container Roll Out Platforms (CROPs) and Joint Modular Intermodal Containers (JMICs).
Contract Dates	Start: 30 October 2017 Finish: 30 May 2018
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Design, build and supply CROP and JMIC for Army Headquarters (AHQ).

Back to top



Australian Defence Force RPDE — Task 59 155 mm Ammunition Unit Load Carrier (ULC)

Contract Title and Number (including Reference Site)	Contract Title: RPDE Task 59: 155 mm Ammunition Unit Load Carrier (ULC) Contract No.: SC0146/2016 Ref Site: Canberra, Australian Capital Territory
Project Name and Number or Procurement Agency	Project Name: Task 59 155 mm ULC Contract with: Defence Innovation Hub (DIH) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: The purpose of RPDE Task 59 is to develop a prototype Unit Load Carrier (ULC) that can carry a quantity of 155 mm ammunition Configuration Items (CIs) in a single load through the Australian Defence Force (ADF) supply chain. To achieve this ECLIPS designed an internal retention system for unguided and guided 155 mm Ammunition CI that can be secured inside a Joint Modular Intermodal Container (JMIC). An integration platform was designed to allow the ULC to interface with the in-service ISO 1C Flatrack. To ensure maximum flexibility of deployment throughout the ADF supply chain ECLIPS developed the interface platform to attach the JMIC to the ISO 1C Flatrack in 8 JMIC and 2 JIMC configurations. These two systems will be known as Full Length ISO 1C Flatrack Adaptor (8 x JMIC) and Twin JMIC Interface Platform (2 x JMIC) as per the contract deliverables table.
Contract Dates	Start: 23 December 2016 Finish: 2 March 2018
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Design, build prototype Unit Load Carrier (ULC) and integration platforms.

Back to top



Australian Defence Force LAND 121 Contract — ISO 1C Flatracks (2157 units) and Cargo Gate Kits

Contract Title and Number (including Reference Site)	Contract Title: LAND 121 Phase 3B MHC Flatrack ISO 1C Contract No.: 121-00102 Ref Site: Canberra, Australian Capital Territory
Project Name and Number or Procurement Agency	Project Name: LAND 121 Phase 3B Contract with: Rheinmetall MAN Military Vehicles Australia End User: Australian Defence Force (ADF)
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: Design and build 2157 ISO 1C flatracks in accordance with the DMO specification, following the full DMO Design Review and Verification/Validation process. The contract also includes Cargo Gate Kits. ECLIPS employs a standalone team of five personnel to manage this contract as well as the NZDF Flatrack contract. The contract has been in place for over 27 months, in which ECLIPS has successfully navigated: Preliminary Design Review Integrated Baseline Review, Commonwealth attended audit of ECLIPS' management systems Detailed Design Review Critical Design Review (ECLIPS is the only contractor, including the prime, to achieve this milestone to date) Production of 4 x Prototype Units V&V program Delivery of batch 0.1a of 18 Flatracks, and Cargo Gate Kits. In the following 12 months ECLIPS initiated delivery of main production batches. View project in Showcase
Contract Dates	Start: 28 January 2014 Finish: October 2017
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Canberra, Australian Capital Territory Nature of Work: Design and build logistics platforms and cargo gate kits.

Back to top



Chevron Australia — Container Roll-Out Warehousing System (CROWS™) x 4000 units

Contract Title and Number (including Reference Site)	Contract Title: Provision of purpose-built logistic platform: Container Roll-Out Warehousing System (CROWS) Contract No.: 00000341 00000337 00000380 Ref Site: Perth, Western Australia
Project Name and Number or Procurement Agency	Project Name: Chevron Australia — Gorgon Project Contract with: Stelsco Hire Pty Ltd End User: Chevron Australia
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: Design and build the 20 ft and 40 ft Container Roll-Out Warehousing System (CROWS™) specifically to meet the functional requirements of logistics operations on Barrow Island (Gorgon Project). This also involved the conduct of a Design Review Process and V&V program to satisfy Chevron that the platforms are fit for purpose. From initial customer engagement to the delivery of 4000 units to Chevron Supply Base in Perth, the project duration was 11 months. This project is complete and since delivery in September 2014, ECLIPS has designed and delivered 100 x 40 ft CROWS, and designed and tested the 45 ft CROWS and the Pipe Intermodal Logistics System (PILS) — both have been accepted by Chevron as baseline products and ECLIPS is now looking to conduct field trials with these products. View project in Showcase
Contract Dates	Start: 7 April 2014 Finish: September 2014
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Perth, Western Australia Nature of Work: Design and construction of logistics platforms and support legs.

Back to top



Chevron KJV Projects

Contract Title and Number (including Reference Site)	Contract Title: Chevron-KJV Phase 2 Chevron-KJV Phase 3 Chevron-KJV Phase 4 Contract No.: G1-VE-Q-0000-N06ZFF560002 G1-NT-PCOKPZFF57 Ref Site: Perth, Western Australia
Project Name and Number or Procurement Agency	Project Name: Gorgon Projects Contract with: Chevron-KJV End User: Chevron
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Supply and delivery of a large quantity of various shipping containers, logistic platforms and reefer containers to Chevron Australia for the Gorgon project on Barrow Island, Western Australia. The containers were modified to meet strict Australian Quarantine requirements that were in place for Barrow Island. List of products delivered as below: 428 x 20 ft Domino Collapsible Flatracks 424 x 40 ft Domino Collapsible Flatracks 452 x 20 ft Half Height Sea Containers 20 x 40 ft Open Top Sea Container 240 x 20 ft ISO Sea Containers 885 x 40 ft ISO Sea Containers 40 x 20 ft High Cube Sea Containers 150 x 20 ft Reefer Containers
Contract Dates	Start: 9 February 2009 Finish: mid 2010
Company Division, Location and Nature of Work	Company Division: Perth office Location: Perth, Western Australia Nature of Work: Supply of shipping containers and logistic platforms.

Back to top



TFTA UOTF Projects

Contract Title and Number (including Reference Site)	Contract Title: Urban Operations Training Facility — Townsville Field Training Area, Design and Construction Contract Contract No.: HC-1 2003 Ref Site: Townsville, Queensland
Project Name and Number or Procurement Agency	Project Name: Urban Operations Training Facility — Townsville Field Training Area Contract with: Commonwealth of Australia (CoA) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design, construction and delivery of a realistic combined arms combat team urban operations training facility (UOTF) for the Australian Defence Force, by using modified shipping containers, to enhance the relevance of Mission Rehearsal Exercise for units about to deploy on operations. View project in Showcase
Contract Dates	Start: July 2008 Finish: September 2009
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Townsville, Queensland Nature of Work: Supply of realistic combined arms combat team urban operations training facility.

Back to top



Atlas Wodgina Kitchen Expansion Project

Contract Title and Number (including Reference Site)	Contract Title: Provision of New Kitchen and Dry Mess renovation work Contract No.: N/A Ref Site: Wodgina DSO Mine, Western Australia
Project Name and Number or Procurement Agency	Project Name: Atlas Wodgina Kitchen Contract with: Atlas Iron Limited End User: Atlas Iron Limited
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and construction of a 400 square metre kitchen and temporary dining facility to serve 1980 meals per day at a mining camp at Wodgina (near Port Hedland), Western Australia. The facility was constructed using container based modules that were prefabricated, delivered to site, and remaining internal kitchen fit out completed. ECLIPS then undertook a refurbishment of the existing dining facility whilst the temporary dining modules were used. The temporary dining modules were removed from site at completion and handover of refurbished dining hall. View project in Showcase
Contract Dates	Start: 4 November 2013 Finish: 9 December 2013
Company Division, Location and Nature of Work	Company Division: Perth office Location: Perth, Western Australia Nature of Work: Design, supply and install modular buildings.

Back to top



Australian Navy Generator Modules

Contract Title and Number (including Reference Site)	Contract Title: Five Generator Sets Contract No.: NAVY/RFT/005/DG/12 Ref Site: HMAS Cerberus, Victoria
Project Name and Number or Procurement Agency	Project Name: ASDEFCON procurement project Contract with: Commonwealth of Australia (CoA) End User: Department of Defence Royal Australian Navy (RAN)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and build five 20 ft container-based training modules for the Australian Navy, to be used as a deployable training facility to allow students to dismantle, repair, assemble and test the fitted Cummins 20KVA diesel generator. The module featured: full side opening doors on one side wall, and half opening doors on the other side to allow maximum access electrical load bank to allow the generator to run and be tested under load an integrated fire suppression system that operated while the generator was being dismantled an internal overhead gantry system and hoist bunded floor under diesel generator. This project was delivered on budget and on time. The facility has been in service since June 2013 and is currently being fully utilised as part of the Navy's technician training program at HMAS Cerberus in Victoria, Australia. From signing of contract to delivery took four months. View project in Showcase
Contract Dates	Start: 26 February 2013 Finish: September 2013
Company Division, Location and Nature of Work	Company Division: Canberra office Location: HMAS Cerberus, Victoria Nature of Work: Modification of shipping containers and specialised fit out.

Back to top



Manitowoc 80 tonne Crane CES Carriage and Stowage Solution

Contract Title and Number (including Reference Site)	Contract Title: 80 tonne Crane CES Carriage and Stowage Solution Contract No.: PO 4100030014 - PO 4100030016 Ref Site: 10 FSB Townsville, Queensland
Project Name and Number or Procurement Agency	Project Name: DEF(AUST 11095) 80 tonne Crane CES Carriage and Stowage Solution Contract with: Manitowoc Cranes End User: Australian Defence Force (ADF)
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: Design and build eight attachment frames and canvas cover kits to carry Grove 80T Crane CES equipment to suit ISO 1C Flatracks as developed for Land 121 Phase 3B contract. The contract also included supply of eight ISO 1C Flatracks. The attachment frames and canvas cover kits are designed to fit the flatracks without modification. View project in Showcase
Contract Dates	Start: 24 June 2015 Finish: June 2016
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Canberra, Australian Capital Territory Nature of Work: Design and construction of flatrack attachment frames and canvas cover kits.

Back to top



Cyclone Shelters

Contract Title and Number (including Reference Site)	Contract Title: Provision of Six Cyclone Shelters at Abydos Development Project Contract No.: N/A Ref Site: Abydos, Western Australia
Project Name and Number or Procurement Agency	Project Name: Modular cyclone shelters Contract with: Atlas Iron Limited End User: Atlas Iron Limited
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and build six cyclone-rated shelters compliant to the Queensland Government Design Guidelines for Queensland Public Cyclone Shelters, to provide a safe environment for up to 40 people per module for the duration of a cyclone, in a wind Region D rated area. Each module uses a core of two modified 40 ft high-cube shipping containers to make the shelters fully transportable. The cyclone shelters includes a weighted inbuilt footing system, passive ventilation, air conditioning, water supply and waste storage, toilet, and kitchen facilities. The shelters are also non-reliant on external power supply if power is cut during a cyclone event. View project in Showcase
Contract Dates	Start: 1 November 2012 Finish: April 2013
Company Division, Location and Nature of Work	Company Division: Perth office Location: Perth, Western Australia Nature of Work: Design and construction of modular accommodation.

Back to top



MHOV Project — Flatracks

Contract Title and Number (including Reference Site)	Contract Title: Supply of the MHOV Project — Flatracks Contract No.: 1-435-06-SBIFLT Ref Site: Canberra, Australian Capital Territory
Project Name and Number or Procurement Agency	Project Name: MHOV Project Flatracks for New Zealand Defence Force Contract with: Rheinmetall MAN Military Vehicles Australia End User: New Zealand Defence Force (NZDF)
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: Design and build sixteen ISO 1C flatracks as per DMO specifications for Land 121, for the New Zealand Defence Force.
Contract Dates	Start: 19 November 2014 Finish: January 2016
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Wellington, New Zealand Nature of Work: Design, test and evaluate (DT&E) rapid prototype and production project.

Back to top



Australian Army — Supply of Waste Water Treatment Plant (WWTP) to AACAP 2019

Contract Title and Number (including Reference Site)	Contract Title: Provision of a Waste Water Treatment Plant to AACAP 2019 Contract No.: PO 4501072376 Ref Site: near Jigalong Community, Western Australia
Project Name and Number or Procurement Agency	Project Name: AACAP 2019 Contract with: Australian Army. 6 Engineer Support Regiment End User: 21 Construction Squadron
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Supply, freight, commission, maintain and de-commission 28 kl Waste Water Treatment Plant for Army Construction Camp near Jigalong Community, Western Australia. Hire period of 4 months.
Contract Dates	Start: February 2019 Finish: August 2019
Company Division, Location and Nature of Work	Company Division: ECLIPS Logistics Location: Perth, Western Australia Nature of Work: Project management, installation, maintenance and removal.

Back to top



DTSO Transportable Field Trials Laboratory (TFTL)

Contract Title and Number (including Reference Site)	Contract Title: Design and construct a Transportable Field Trials Laboratory Contract No.: N/A Ref Site: Edinburgh, South Australia
Project Name and Number or Procurement Agency	Project Name: Transportable Field Trials Laboratory Contract with: Australian Defence (DSTO) End User: Defence Science and Technology Organisation
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and build a deployable double roll-out 20 ft module, to be used as a manned laboratory in remote South Australian desert locations. The module is self-contained and is fitted with a diesel generator, fresh and waste water supplies, electrical and data services and distribution, mounted computer server rack and cabinet to numerous outlets within the cabin space. The module also has provisions for removal of cargo, including mobile computer cases and boxed equipment. The module has two sides that roll out when deployed and rolls back into an ISO-compliant container for transport. The project was delivered on budget and on time. From signing of contract to delivery took 11 months. The module has been in service since October 2010. View project in Showcase
Contract Dates	Start: 27 October 2009 Finish: October 2010
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Edinburgh, South Australia Nature of Work: Design and construction of modular laboratory.

Back to top



Agilent Technologies — Equipment Calibration Laboratory

Contract Title and Number (including Reference Site)	Contract Title: Building of new VOSCAL Container for mobile calibration facility in Mulgrave VIC Contract No.: N/A Ref Site: Blackburn, Victoria
Project Name and Number or Procurement Agency	Project Name: VOSCAL Container for mobile calibration facility Contract with: Agilent Technologies End User: Agilent Technologies
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and build a deployable single roll-out 20 ft module, to be used as a manned laboratory to test and calibrate electronic equipment at customers' work sites. This module was fitted out with a complex array of electronic equipment, and when side rolled out, two personnel worked inside a stable environmentally controlled laboratory. The module was also provided with an external power connection, along with jacks to maintain a level platform. This project was delivered on budget and on time. From signing contract to delivery took four months. This module has been in service since October 2012. View project in Showcase
Contract Dates	Start: 11 June 2012 Finish: October 2012
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Melbourne, Victoria Nature of Work: Design, test and evaluate (DT&E) and rapid production project.

Back to top



ADF Maritime Surveillance Tonga — Accommodation Module

Contract Title and Number (including Reference Site)	Contract Title: ADF Maritime Surveillance Tonga — Accommodation Module Contract No.: N/A Ref Site: Tonga
Project Name and Number or Procurement Agency	Project Name: ASDEFCON Procurement project Contract with: Defence Cooperation Program (DCP) End User: Royal Tongan Navy
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and modify a single 20 ft container to act as a deployable module to provide accommodation for six extra crew members required for extended trips by patrol boats operated by the Tongan Government for Pacific Region surveillance activities. The module includes two separate bedrooms, air conditioning and marine quality door and windows. The module is designed to be quickly installed and removed from the boat depending on operational requirements.
Contract Dates	Start: 3 February 2016 Finish: mid 2016
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Tonga Nature of Work: Design, test and evaluate (DT&E) and rapid production project.

Back to top



25 tonne Crane Spreader Bar

Contract Title and Number (including Reference Site)	Contract Title: 25 tonne Crane Spreader Bar Contract No.: N/A Ref Site: N/A
Project Name and Number or Procurement Agency	Project Name: 25 tonne Crane Spreader Bar Contract with: ECLIPS R&D project End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Design and build a crane spreader bar that is adjustable and can be included in the CES equipment for the Manitowoc Cranes CES Carriage and Stowage Solution. The spreader bar suits the configurations of all of the containers that are being transported and moved as part of the Land 121 project.
Contract Dates	Start: November 2015 Finish: March 2017
Company Division, Location and Nature of Work	Company Division: Canberra office Location: Canberra, Australian Capital Territory Nature of Work: Design, test and evaluate (DT&E) rapid prototype and production project.

Back to top



Defence Innovation Hub — Army Innovation Day 2021 Condition Based Maintenance Software System (CBMSS)

Contract Title and Number (including Reference Site)	Contract Title: Condition Based Maintenance Software System (CBMSS) Contract No.: P20-141379 Ref Site: ECLIPS Logistics, Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: CBMSS Contract with: Defence Innovation Hub (DIH) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: ECLIPS is developing an OEM agnostic, multi-fleet, Condition Based Maintenance (CBM) Software System (CBMSS). The CBMSS ingests condition data from a range of sources, including Health and Usage Monitoring Systems (HUMS) and will be integrated with SAP (Defence's future ERP system) for fleet management, logistics decision support and process automation. This enables improved Operational Availability by minimising Logistics Lag Time and Administrative Downtime, thereby making Army more effective. Successful implementation of CBMSS will also reduce Through Life Support costs, making Army more efficient.
Contract Dates	Start: 27 October 2020 Finish: 2022
Company Division, Location and Nature of Work	Company division: ECLIPS Logistics Location: Brisbane, Queensland Nature of work: Design, develop, test and evaluate.

Back to top



Defence Innovation Hub — Digitalisation of the Joint Modular Intermodal Logistics System (D-JMILS) Ph2

Contract Title and Number (including Reference Site)	Contract Title: Digitalisatlon of Joint Modular Intermodal Logistics System D-JMILS Contract No.: P18-750856 Ref Site: ECLIPS Logistics, Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: D-JMILS Contract with: Defence Innovation Hub (DIH) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Prime
Description of Product or Service Provided	Description of Contract: Digitalisation of JMILS (D-JMILS) involves the integration of location and condition monitoring sensors using intrinsically safe RuBee magnetic near field communications to the Joint Modular Intermodal Logistics System (JMILS). JMILS is a series of modular, intermodal, scalable, interconnectable logistics packaging and platforms designed to move efficiently through the Defence supply chain and are compatible with Army’s Land 121 vehicles, including the HX77 ILHS truck and 40M. The aim of D-JMILS is to enable adaptive and focused logistics support through a digitalised and integrated packaging solution in order to improve equipment Operational Availability rates and reduce Through Life Support costs. D-JMILS will isolate and reduce the Logistic Delay and Administration Delay time that greatly impacts Operational Availability.
Contract Dates	Start: 7 October 2019 Finish: 18 December 2020
Company Division, Location and Nature of Work	Company division: ECLIPS Logistics Location: Brisbane, Queensland Nature of work: Design, develop, test and evaluate.

Back to top



Hanwha LAND 400-3 — Integrated Logistics Support Services Risk Mitigation Activity (RMA)

Contract Title and Number (including Reference Site)	Contract Title: Hanwha Services Agreement - Contract No: 04/2020 Contract No.: Additional Services Work Order 03 Ref Site: ECLIPS Logistics, Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: LAND 400-3 RMA Contract with: Hanwha Defense Australia (HDA) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: Professional services to Hanwha Defense Australia for the provision of Integrated Logistics Support Professional Services for the LAND 400-3 Risk Mitigation Activity (RMA).
Contract Dates	Start: 12 February 2020 Finish: 30 September 2021
Company Division, Location and Nature of Work	Company division: ECLIPS Logistics Location: Brisbane, Queensland Nature of work: Professional ILS services.

Back to top



Hanwha LAND 400-3 — Offboard Health and Usage Monitoring System (HUMS)

Contract Title and Number (including Reference Site)	Contract Title: Hanwha Services Agreement - Contract No: 04/2020 Contract No.: Additional Services Work Order 02 Ref Site: ECLIPS Logistics, Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: LAND 400-3 HUMS Contract with: Hanwha Defense Australia (HDA) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: The Offboard HUMS system has been developed to work with the vehicle onboard HUMS and will drive CBM activity.
Contract Dates	Start: October 2020 Finish: April 2021
Company Division, Location and Nature of Work	Company division: ECLIPS Logistics Location: Brisbane, Queensland Nature of work: Design, develop, test and evaluate offboard HUMS software.

Back to top



Hanwha LAND 400-3 — Vehicle Information Management System (VIMS)

Contract Title and Number (including Reference Site)	Contract Title: Hanwha Services Agreement - Contract No: 04/2020 Contract No.: Hanwha Services Agreement - Contract No: 04/2020 Ref Site: ECLIPS Logistics, Brisbane, Queensland
Project Name and Number or Procurement Agency	Project Name: LAND 400-3 VIMS Contract with: Hanwha Defense Australia (HDA) End User: Australian Defence Force (ADF)
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: VIMS will be a key component of Defence’s Whole of Fleet Management (WFM) system for the LAND 400-3 Infantry Fighting Vehicle (IFV) capability. It will incorporate modelling capabilities including the use of Condition Based Maintenance (CBM) to predict maintenance actions and drive cost and schedule modelling. The VIMS has been developed to work with the vehicle HUMS and will drive CBM activity.
Contract Dates	Start: February 2020 Finish: ongoing
Company Division, Location and Nature of Work	Company division: ECLIPS Logistics Location: Brisbane, Queensland Nature of work: Design, develop, test and evaluate offboard Vehicle Information Management System (VIMS).

Back to top



Camcode — Army Headquarters Codification and Unique Identification Program

Contract Title and Number (including Reference Site)	Contract Title: Professional Services Contract No.: Multiple purchase orders Ref Site: 1 BDE, 3 BDE, 7 BDE, 17 BDE, JLU Nationally
Project Name and Number or Procurement Agency	Project Name: AHQ Codification and UID Program Contract with: Army Headquarters (AHQ) End User: Australian Army
Prime or Subcontractor	Subcontractor
Description of Product or Service Provided	Description of Contract: ECLIPS provided professional services to remediate codification data and uniquely identify a range of products for the Australian Army. Services included engineering required to inform codification. UID barcode labelling has included the labelling of almost 200,000 assets. This project, conducted at Army Headquarters (AHQ), is a foundation activity for the establishment of a digital supply chain, including the use of AIT. ECLIPS also supported Army’s policy updates in relation to DEF(AUST)1000C for packaging and labelling.
Contract Dates	Start: January 2017 Finish: March 2020
Company Division, Location and Nature of Work	Company division: ECLIPS Location: Canberra, Australian Capital Territory Nature of work: Professional services.

Back to top